Georgia Fiero Club Forum

All Things Fiero => The Market => Topic started by: HarryT on August 22, 2012, 12:27:58 am

Title: Need Left rear Control Arm (A Frame)
Post by: HarryT on August 22, 2012, 12:27:58 am

I need a left rear control arm (A Frame) for an 85 Fiero.  I will check the local junk yards if there are any in my area.
Harry

Title: Re: Need Left rear Control Arm (A Frame)
Post by: Fierofool on August 22, 2012, 09:41:27 pm

Harry, see the Going Out of Business thread below and contact Ashby.  I'd bet he's got what you need. 

Title: Re: Need Left rear Control Arm (A Frame)
Post by: HarryT on August 23, 2012, 12:24:30 am

Charlie;
I just sent him an Email.  We will see if he has one.
Thanks;
Harry

Title: Re: Need Left rear Control Arm (A Frame)
Post by: HarryT on August 25, 2012, 12:22:05 pm

I have a control arm on its way now.  It is a rust free, with good bushings and ball joint.  $40. including shipping.  I could not drive to Atlanta and back for that.  The local junk yard quoted me $65.
Harry

Title: Re: Need Left rear Control Arm (A Frame)
Post by: Fierofool on August 25, 2012, 01:04:06 pm

I don't know how hard they are to change but you may want to transfer those poly bushings from the old one to the new one. 

Title: Re: Need Left rear Control Arm (A Frame)
Post by: HarryT on August 25, 2012, 01:33:35 pm

When it gets here I will try pressing them out to see if they will come out intact.  By the way I used tools that I have not used in over 40 years to get the control arm out,  IE - coil spring compressor, ball joint forks etc. etc.  I am only glad that I still had them.
Harry