Georgia Fiero Club Forum
All Things Fiero => Tech Tips, Tech Questions => Topic started by: WV Mike on January 17, 2015, 02:38:01 pm
-
Does anyone know the part numbers for all of the coolant hoses for an 88 V6?
-
Mike, I'll send you a PDF file of the P22 Fiero Parts List. It gives all the factory part numbers for cross reference.
-
That would be awesome!!! Thanks.
-
From looking at pages 50 & 51, here is what I have so far:
18) GM ???????? radiator inlet inter - Dayco ?????
27) GM 10080278 radiator inlet front - Dayco 71368 pipe to radiator upper
29) GM 10052300 radiator outlet front - Dayco 71369 pipe to radiator lower
30) GM 10120079 radiator outlet rear - Dayco ?????
31) GM 10032771 radiator inlet rear - Dayco 70687 pipe to engine upper
17) hose clamps 33.3 to 57.2 mm
-
Check my Rock Auto clearance thread. I think there are a lot of 88 hoses on clearance sale,.
-
Be careful about buying replacement hoses from the Fiero Store. At least one of them is ~1/2 inch too short (where it connects next to the water pump) and is essentially unusable. NAPA used to carry that hose (and probably the others.) It worked fine.
I believe that Rodney Dickman is now selling replacement hoses for our cars, too. Been a while since I checked his site, however.
-
I did check Rodney Dickman's site yesterday. He is selling all of the replacement hoses for my 88, which is great. His prices are slightly higher than local auto stores; however, on 2 hoses #18 and #30, which I've not found available from a local auto store, I'm going to buy from him.
http://rodneydickman.com/catalog/product_info.php?products_id=344 (http://rodneydickman.com/catalog/product_info.php?products_id=344)