Georgia Fiero Club Forum

All Things Fiero => Tech Tips, Tech Questions => Topic started by: scottb on May 20, 2016, 07:40:49 pm

Title: Winaldl
Post by: scottb on May 20, 2016, 07:40:49 pm

Can someone point me in the right direction for an idiots guide to winaldl? I have a cable and adapter but i cant figure out how to get the data. Any information would be very helpful.

Thanks, Scott

Title: Re: Winaldl
Post by: f85gtron on May 20, 2016, 10:22:07 pm

It's been a while, but I'll try to help.
You have to choose the correct ecm From the menu, then choose the right com port.  Then try to connect. It's possible that you'll need a resistor to get data flowing on some ecm's.
I'm sure i missed something, but maybe one of those items will get you going.

Title: Re: Winaldl
Post by: scottb on May 21, 2016, 08:40:10 am

Ok, i will di some research tomorrow.  Got to try and keep with Charlie today.

Title: Re: Winaldl
Post by: Raydar on May 21, 2016, 11:04:41 am

If your ECM is stock, it should be a 7170. Or 1227170. (However it's displayed. I forget.)

Title: Re: Winaldl
Post by: scottb on May 22, 2016, 12:21:44 pm

Thanks Steve, will do some more playing around with it next week