Georgia Fiero Club Forum

All Things Fiero => The Market => Topic started by: scottb on June 09, 2018, 05:52:04 pm

Title: '01 3100
Post by: scottb on June 09, 2018, 05:52:04 pm

I have decided to change directions with my car and offer up an 01 3100, unknown mileage, that was running when i pulled it last year. I do have the ECM and wiring harness to go with it. $100.00, pick up between Cumming & Canton

Title: Re: '01 3100
Post by: GTXVette on June 10, 2018, 09:53:35 pm

Scott I will take that one 4 oh 4 5 three 6 8 seven2 oh john.

Title: Re: '01 3100
Post by: GTXVette on June 12, 2018, 08:01:58 am

hey scott, call

Title: Re: '01 3100
Post by: Raydar on June 12, 2018, 08:25:19 am

Whatcha gonna do?

Title: Re: '01 3100
Post by: GTXVette on June 12, 2018, 11:15:32 am

well maybe put the heads on the 3.4. i think they are better than the 3.1 heads on it now. if they are the same then cheap spares. raydar, would you have time to check out my car i am chasing a very high Idle and the combo of parts isn't normal so no one will take the time.  IT IS JUST VOLTAGE NUMBERS they eather read right or not, I just am not sure what right is or how to get it there.

Title: Re: '01 3100
Post by: scottb on June 12, 2018, 03:55:57 pm

Hey John, called and left you a message

Title: Re: '01 3100
Post by: GTRS Fiero on June 12, 2018, 06:52:52 pm

The 3100 heads should be better, but I suspect that the 3100 heads are not a direct fit.

Title: Re: '01 3100
Post by: GTXVette on June 12, 2018, 08:43:40 pm

Sold.   GTRS the heads should work, it has 3100 heads now but gen.I
 heck nothin' on this car is factory so we will just make it fit.

Title: Re: '01 3100
Post by: GTRS Fiero on June 12, 2018, 08:46:58 pm

I bow to your experience.  I thought that the 3.1 and 3100 heads were different.

Title: Re: '01 3100
Post by: GTXVette on June 13, 2018, 07:10:40 am

there's exceptions o the rule and again I have been at this for only a year or so.
 around 96 down chevy got the same heads on the 3.4 fwd engine as the 2.8's wether fwd or rwd.
 FWD cars from 3100 on got aluminum heads. block diff is starter location. I think if it's a xx00 liters number it has aluminun heads and if x.x /liters it has iron.
 around 2000 or just before they made a better head that is what I am after but just after that they used VVT and we don't want those

Title: Re: '01 3100
Post by: Raydar on June 13, 2018, 03:05:45 pm

Quote from: GTXVette on June 13, 2018, 07:10:40 am

there's exceptions o the rule and again I have been at this for only a year or so.
 around 96 down chevy got the same heads on the 3.4 fwd engine as the 2.8's wether fwd or rwd.
 FWD cars from 3100 on got aluminum heads. block diff is starter location. I think if it's a xx00 liters number it has aluminun heads and if x.x /liters it has iron.
 around 2000 or just before they made a better head that is what I am after but just after that they used VVT and we don't want those

VVT didn't start until 2005 or 2006, with the 3900. You should be good.

Title: Re: '01 3100
Post by: scottb on June 21, 2018, 04:49:21 pm

Hey John, any chance you could pick up the motor tomorrow? I will be up there until about 1 or so.

Title: Re: '01 3100
Post by: scottb on June 27, 2018, 06:17:34 am

Hey John, if you have a hoist I can deliver.....

Title: Re: '01 3100
Post by: GTXVette on July 09, 2018, 08:44:53 pm

saw you sunday but forgot to get your number, call , john.