Georgia Fiero Club Forum

All Things Fiero => General Fiero Discussion => Topic started by: GTRS Fiero on January 11, 2019, 10:35:51 pm

Title: Brake booster bushing
Post by: GTRS Fiero on January 11, 2019, 10:35:51 pm

I was looking for the threaded bushing for the brake booster hose where it goes into the intake, but was unable to find  the bushing.  Now, I could go to the parts store, but was wondering if anyone had info on this, already?

Title: Re: Brake booster bushing
Post by: GTRS Fiero on January 12, 2019, 09:33:27 pm

This is the brass fitting to which I refer:

Title: Re: Brake booster bushing
Post by: TopNotch on January 14, 2019, 10:24:49 am

You should be able to find one in the pipe fittings section of any well equipped hardware store.

Title: Re: Brake booster bushing
Post by: GTRS Fiero on June 29, 2019, 09:41:46 am

I did, but it is only a passing match.

Title: Re: Brake booster bushing
Post by: Raydar on June 29, 2019, 11:28:26 am

If you source one from another Fiero, be aware that the 87-88 fitting is larger than the 85-86.

Edit - Passing match?

Title: Re: Brake booster bushing
Post by: GTRS Fiero on June 29, 2019, 12:24:22 pm

See page 13 of the February 2019 newsletter.