Georgia Fiero Club Forum

All Things Fiero => Expert Tech Advice => Topic started by: fiero128 on September 14, 2019, 06:51:19 am

Title: engine and Trans mounts
Post by: fiero128 on September 14, 2019, 06:51:19 am

Can I get photos of all the mountings needed for the V6 engine and Getrag manual trans.
O got the one under the timing cover fr the V6 engine from ebay
I am starting to get enough to put this together again

Title: Re: engine and Trans mounts
Post by: GTRS Fiero on September 14, 2019, 07:18:28 am

Are you using rubber or poly mounts?

Title: Re: engine and Trans mounts
Post by: Fierofool on September 14, 2019, 05:13:48 pm

The manual transmission mounts are the same for all years.  https://www.fierostore.com/Product/Browse.aspx?d=318&p=1

The brackets that bolt between the mount and transmission are different by transmission.  I believe you said you were swapping in a Getrag?   http://rodneydickman.com/catalog/product_info.php?cPath=28&products_id=184

Title: Re: engine and Trans mounts
Post by: GTRS Fiero on September 30, 2019, 10:37:57 pm

Since you have a manual transmission, I recommend that you use poly mounts.  There is an OEM hydraullic mount, but the less expensive aftermarket mount lasts much longer.

Title: Re: engine and Trans mounts
Post by: GTRS Fiero on September 30, 2019, 10:40:00 pm

You may want to read through the thread below, to be sure you don't have unexpected issues.

http://www.gafiero.org/bbs/index.php?topic=3276.0