Post by: GTRS Fiero on June 30, 2020, 08:17:26 pm
Edited :
Meeting will run from 10AM until no later than 2PM.
THE JULY MEETING HAS BEEN MOVED TO THE DULUTH DINER
Scottb's plans have changed and he won't be able to open the shop for a working meeting. We will hold the meeting back at our regular spot at the Duluth Diner at 1:30 on Saturday.
Post by: Fierofool on July 01, 2020, 08:26:24 am
Post by: Raydar on July 01, 2020, 05:05:02 pm
I'll try to actually make this one. Hard call, these days.
Post by: GTRS Fiero on July 01, 2020, 05:42:22 pm
Post by: NoMad on July 01, 2020, 07:28:18 pm
Post by: Mike_21 on July 01, 2020, 07:41:01 pm
Post by: The Art Doctor on July 01, 2020, 10:05:00 pm
Post by: scottb on July 03, 2020, 05:34:43 pm
Post by: Raydar on July 04, 2020, 11:04:07 am
Post by: TopNotch on July 04, 2020, 11:39:32 am
Post by: GTRS Fiero on July 04, 2020, 11:54:35 am
Post by: Fierofool on July 04, 2020, 02:06:11 pm
If you don't know where the shop is, email, PM, text or call me or send us an email at georgiafieroclub@gmail.com, prior to Saturday morning.
Post by: scottb on July 07, 2020, 05:22:10 pm
Post by: Fierofool on July 07, 2020, 10:02:52 pm
Post by: Fierofool on July 08, 2020, 09:08:14 am
IN THE EVENT IT HAS TO BE MOVED, I HAVE CHECKED WITH DULUTH DINER AND THEY SAY THEY ARE OPEN FOR REGULAR DINING AND CAN ACCEPT US. KEEP CHECK ON THIS THREAD FOR FURTHER DEVELOPMENTS.
Post by: MikeMac on July 08, 2020, 01:55:54 pm
THE JULY MEETING HAS BEEN MOVED TO THE DULUTH DINER
Scottb's plans have changed and he won't be able to open the shop for a working meeting. We will hold the meeting back at our regular spot at the Duluth Diner at 1:30 on Saturday.
So far we have Fierofool and Mikemac confirmed as attending.
Post by: Raydar on July 08, 2020, 04:02:07 pm
Getting to and leaving the shop, early, was looking do-able. I don't want to just run in, and run right back out.
Post by: GTRS Fiero on July 08, 2020, 05:51:57 pm
THE JULY MEETING HAS BEEN MOVED TO THE DULUTH DINER
Scottb's plans have changed and he won't be able to open the shop for a working meeting. We will hold the meeting back at our regular spot at the Duluth Diner at 1:30 on Saturday.
So far we have Fierofool and Mikemac confirmed as attending.
Thanks for the update. It should be good to get another shot at the Diner.
Post by: GTRS Fiero on July 08, 2020, 05:52:14 pm
Hmmm... may not make it. We're supposed to be somewhere, mid afternoon.
Getting to and leaving the shop, early, was looking do-able. I don't want to just run in, and run right back out.
No eat-and-run?
Post by: Raydar on July 08, 2020, 06:47:15 pm
Hmmm... may not make it. We're supposed to be somewhere, mid afternoon.
Getting to and leaving the shop, early, was looking do-able. I don't want to just run in, and run right back out.
No eat-and-run?
Not when a 1-way drive is 1.5 hours. Sorry.
Post by: GTRS Fiero on July 08, 2020, 07:10:34 pm
Post by: Raydar on July 08, 2020, 07:20:27 pm
Hey, I understand. 20 hours, round trip, for me.
Awww, c'mon! Butch up.
Post by: GTRS Fiero on July 08, 2020, 07:21:06 pm
Post by: scottb on July 08, 2020, 07:23:15 pm
Post by: GTRS Fiero on July 08, 2020, 07:26:44 pm
We have 2 people at work who are being tested, because they have 1 symptom. If either one tests positive, I foresee a test in the future of everyone in the building...and a 14-day quarantine.
Post by: Raydar on July 08, 2020, 07:51:41 pm
I did. Twice. Your turn.
I very seldom miss a meeting.
Girlfriends oldest daughter works at a bank, someone there tested positive for KungFlu. She got tested today but won't have any results until the middle of next week. Mike, Charlie and myself talked about it this morning and thought it would be best if I "quarentined" until she got her test results back
I know it's not fun, but probably the responsible thing to do. (Dontcha hate that?)
Let me know what transpires. I might be up for a trip to the shop, in the next week or two, when I can actually spend some time and make myself useful.
Instead of burning a whole trip for an "eat and run".
Post by: Fierofool on July 08, 2020, 08:31:26 pm
Post by: The Art Doctor on July 08, 2020, 09:50:29 pm
Post by: GTRS Fiero on July 08, 2020, 10:01:17 pm
I did. Twice. Your turn.
I very seldom miss a meeting.
Sorry. I shouldn't have started this, but that isn't what I meant.
Post by: GTRS Fiero on July 08, 2020, 10:05:14 pm
I can make the meeting at Duluth Diner at 1:30...But if you have underlying health issues you might have a different opinion.
Likely, but about the same risk as going to the store, depending on how they are doing their stuff. Some places basically have each table isolated by plastic sheets. If GFC spreads out, it should not be a problem.
Post by: NoMad on July 08, 2020, 10:46:59 pm
Post by: Raydar on July 09, 2020, 09:14:03 am
Aw, come on, Steve. ;) I've driven all the way to Anderson, SC for a good prime rib. But then, things like that run in the family. Mom and Dad once loaded up Ray and Royce and drove all the way down near Valdosta to have breakfast as a restaurant they found once on a trip to Florida.
I get it. I loaded up and drove to Hickory one morning, to meet the NC Fiero folks. Made for a long day, but it was fun.
Keep in mind that anything I do is now ~40-50 miles farther than it was, in February. It wouldn't be an issue, if I weren't in a time crunch for the afternoon.
Going to have to skip this one. Everything is taking longer since I messed up my knee really bad last week.
Ouch. I hope you recover quickly.
Post by: Fierofool on July 09, 2020, 10:26:50 am
I get it. I loaded up and drove to Hickory one morning, to meet the NC Fiero folks. Made for a long day, but it was fun.
Keep in mind that anything I do is now ~40-50 miles farther than it was, in February. It wouldn't be an issue, if I weren't in a time crunch for the afternoon.
Melissa and I did the same thing with our first 85GT. That's how I met Jack Cooke. We started on a short fun run with them after the meet but decided they were too wild for us and we dropped out.
Post by: Budgetman72 on July 09, 2020, 07:18:15 pm
Post by: GTRS Fiero on July 09, 2020, 07:19:43 pm
Post by: Fierofool on July 09, 2020, 09:37:15 pm
MikeM
Charlie
Pat
Larry +3
Jason (+?)
Jordan
Roger?
MWeldon?
Anyone else?
Post by: Mike_21 on July 10, 2020, 06:45:21 am
Post by: Slyp on July 10, 2020, 03:51:11 pm
Post by: The Art Doctor on July 10, 2020, 05:32:13 pm
Post by: GTRS Fiero on July 10, 2020, 06:49:10 pm
Post by: GTRS Fiero on July 10, 2020, 07:24:35 pm
Girlfriends oldest daughter works at a bank, someone there tested positive for KungFlu. She got tested today but won't have any results until the middle of next week. Mike, Charlie and myself talked about it this morning and thought it would be best if I "quarentined" until she got her test results back
I'm remiss. Scott, seriously, I hope you don't have COVID, but keep us posted, either way.
Post by: The Art Doctor on July 10, 2020, 07:35:22 pm
Post by: scottb on July 10, 2020, 07:40:14 pm
Post by: Raydar on July 10, 2020, 10:31:51 pm
Ok all 4 of us are coming. The ladies are looking forward to it.
Larry, if you haven't seen it already, check out my PM on Pennocks. It'll be under "Inbox", but you'll need to be logged in.
If you can't get to it let me know. I'll send you the info here.
Post by: The Art Doctor on July 10, 2020, 11:08:31 pm
Post by: scottb on July 11, 2020, 06:21:19 am
. now the second......these things do multiply dont they?
Careful what you wish for.........
Post by: GTRS Fiero on July 11, 2020, 09:33:19 am
Post by: TopNotch on July 11, 2020, 07:25:18 pm
Pictures of the meeting attendees would be awesome.They are awesome...
After the meeting, the usual tire-kicking session...
Post by: GTRS Fiero on July 11, 2020, 07:32:37 pm
Very interesting effect, the hair of the guy behind Fierofool in the diner.
Post by: scottb on July 11, 2020, 07:37:45 pm
Post by: GTRS Fiero on July 11, 2020, 08:07:03 pm
Post by: Fierofool on July 11, 2020, 08:49:39 pm
Also, I'd like to welcome and thanks to Larry's wife, daughter, and son for being a part. It sounded like, and we hope they will become a regular part of the club.
And welcome to Bill, also. This guy is no stranger to Fieros, owning 3, including one set up for racing. A 4-banger with a Chevy 2-bbl carb producing about 150 hp.
Post by: GTRS Fiero on July 11, 2020, 09:01:46 pm
I wondered who that was.
Post by: The Art Doctor on July 11, 2020, 10:43:43 pm
Scott, good to hear you failed your test.
Post by: GTRS Fiero on July 11, 2021, 06:41:09 pm
Post by: Spartanzz on July 11, 2021, 08:34:53 pm
Post by: GTRS Fiero on July 11, 2021, 08:43:51 pm