Georgia Fiero Club Forum

All Things Fiero => Tech Tips, Tech Questions => Topic started by: 87GoldStandard on October 07, 2020, 06:12:47 pm

Title: EGR Solenoid Bracket Bolt
Post by: 87GoldStandard on October 07, 2020, 06:12:47 pm

Does anyone know where to get tla replacement for the 15mm solenoid bracket? Or possibly the dimensions to pick up a close match? The head broke off of mine. Any help is appreciated.

Title: Re: EGR Solenoid Bracket Bolt
Post by: GTRS Fiero on October 07, 2020, 06:14:40 pm

Were you able to get the shaft out?

Title: Re: EGR Solenoid Bracket Bolt
Post by: Fierofool on October 07, 2020, 06:30:16 pm

Are you close to Cumming, Ga?  Scott has a scrap motor that still has the solenoid bracket bolted to it.  Maybe you could get him to meet you at the shop or pick it up at his home.  He's trying to get rid of the motor.  Most stuff on it has been free.  I take it this is the bolt that goes into the block.  The upper bolt is a smaller sheet metal screw.  Maybe 13mm head. 

Title: Re: EGR Solenoid Bracket Bolt
Post by: scottb on October 07, 2020, 07:18:47 pm

Chances are it is an m6 or an m8 bolt. Available at any hardware store

Title: Re: EGR Solenoid Bracket Bolt
Post by: GTRS Fiero on February 21, 2021, 07:52:22 pm

Did you get this figured out?