Georgia Fiero Club Forum

All Things Fiero => The Market => Topic started by: Wreck It Ralph on February 24, 2021, 11:28:57 am

Title: Stickers sets.
Post by: Wreck It Ralph on February 24, 2021, 11:28:57 am

I’m sure someone has a source but I found a guy selling reproduction sticker for jacking, emissions, warnings etc. $35 for vehicle year and motor specific or can buy individuals.

https://www.fierostickers.com/

Title: Re: Stickers sets.
Post by: Fierofool on February 24, 2021, 01:10:22 pm

I am the originator of the reproduction jacking instruction decals.  When I stopped selling them I gave rights to SEDecal who does our membership decal  and WPBJohn.  John also made other decals you refer to.  Maybe your link is his site, but I would recommend getting the jacking decal from SE.  They are easier to apply due to their production method. They are cut precisely to fit into the decal area.  There should be no application problems with other decals.

Edit:  I went to my tablet and see John's copyright at the bottom.

Title: Re: Stickers sets.
Post by: Wreck It Ralph on February 24, 2021, 01:25:40 pm

They looked good so I ordered a set. Either $35 wasted or well spent. I’ve wasted more on worse.

Title: Re: Stickers sets.
Post by: GTRS Fiero on February 24, 2021, 06:07:37 pm

JohnWPB recently posted about this on PFF, linking his site.  This has been a long journey for him to get back running on this.

I have several sets of his decals from years ago.  All good, except the RPO sticker, which was the wrong size and would not stick.

Title: Re: Stickers sets.
Post by: GTRS Fiero on February 24, 2021, 06:09:29 pm

Quote from: Fierofool on February 24, 2021, 01:10:22 pm

I am the originator of the reproduction jacking instruction decals.  When I stopped selling them I gave rights to SEDecal who does our membership decal  and WPBJohn.

Thanks for that contribution.

Title: Re: Stickers sets.
Post by: JohnWPB on October 05, 2024, 07:13:13 pm

Sorry for reviving a dead thread, but thought this may be of use/need for someone"

For anyone needing stickers, I just did another run of them.  I have both jacking stickers.  One that is specific for 1984 Fieros, as well as the 1985-1988 Fieros.  They changed the physical jack, and the instructions sheet in 1985.

I painstakenly retyped every letter on all of the stickers.  Sounds simple, it is not!  They used a manual press back in the day to apply the lettering to the stickers.  The spacing of just about every word is different, and sometimes the letters in the same word are spaced differently. 

You can check out the stickers at www.FieroDecals.com (http://www.FieroDecals.com)