Georgia Fiero Club Forum

All Things Fiero => The Market => Topic started by: GTRS Fiero on March 10, 2021, 11:26:22 am

Title: 4T60 pan needed
Post by: GTRS Fiero on March 10, 2021, 11:26:22 am

This is the lower pan.  Anyone know where to get this pan?

Title: Re: 4T60 pan needed
Post by: Wreck It Ralph on March 10, 2021, 11:32:54 am

https://cobratransmission.com/4t60-440-t4-pan-bottom-15225-1?gclid=Cj0KCQiA-aGCBhCwARIsAHDl5x-Jqk5mQp4BRHaJUdXMgJgGQYUDDIa0ee90LNgmeL2805-zmuNmktoaAj4UEALw_wcB

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on March 10, 2021, 12:41:24 pm

Thanks.  You da man!  Ordered.

Title: Re: 4T60 pan needed
Post by: Wreck It Ralph on March 10, 2021, 01:25:00 pm

My pleasure

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on March 10, 2021, 02:39:01 pm

Well, they canceled my order, due to part NLA.  So, still on the look.

Title: Re: 4T60 pan needed
Post by: TopNotch on March 10, 2021, 02:39:54 pm

Is 4T60E the same?

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on March 10, 2021, 04:15:39 pm

Yes.

Title: Re: 4T60 pan needed
Post by: TopNotch on March 10, 2021, 05:27:40 pm

I may be able to spare the pan on my old transmission once I make the swap.

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on March 10, 2021, 05:28:59 pm

That'd be great.

Title: Re: 4T60 pan needed
Post by: Fierofool on March 10, 2021, 07:33:45 pm

Was the transmission shipped without a pan or was it damaged? 

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on March 10, 2021, 07:35:45 pm

Mine, or TopNotch's?

Title: Re: 4T60 pan needed
Post by: TopNotch on March 10, 2021, 08:19:37 pm

Both of my transmissions have pans, but if I decide to rebuild the old one, it will still need a pan.

Title: Re: 4T60 pan needed
Post by: Tha Driver on March 11, 2021, 02:54:45 am

I have a 4t60e with bad electronics. I''l tale $15 for the pan, if you pull it when (if we ever?) get together for the stripping party.
~ Paul
aka "Tha Driver"

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on March 11, 2021, 08:05:19 pm

I took a shot and ordered a pan that may fit.

For now, I'm not going far.  I have an hourly inconvenience.

Title: Re: 4T60 pan needed
Post by: GTRS Fiero on May 21, 2021, 07:29:23 pm

The pan I ordered did fit, but the seal is holding, so the pan hasn't been replaced.