16
The Market / 88formula @slowburn57
« on: September 02, 2014, 10:25:57 pm »
My internet name is aerodonamic@att.net . Call me at 770-949-6648 and I can give you any information that I have on this car .aerodon
News:
We are updating the web site. Please be patient.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
General Discussion / Re: Need your prayers for Mrs. FieroFool (Mel)
« on: September 01, 2014, 09:38:43 pm »
It looks like a Labor Of Love Day Charley, so glad Mel is doing so well. I wouldent know to handle lifes problems without Gods help. Best to you and Mel keep us posted. aerodon.
18
General Discussion / Re: Need your prayers for Mrs. FieroFool (Mel)
« on: August 26, 2014, 09:22:21 pm »
The news is soumding detter all the time Charly. Mel is still on my Prayer List. I think the woruld of you and Mel . take good care of her, good people are getting harder to find;!!! Yors Truley aerodon.
19
The Market / Re: pair 14" tires
« on: August 21, 2014, 08:26:21 pm »
Scott, if you still have the 16s what size ,brand and price???
20
The Market / Re: Offers for doner car parts here
« on: August 21, 2014, 08:20:38 pm »
I would like to see the fuel tank saved as there no other unit in the GM line that will cross over . And the sending unit same story. ED Parks was using Astro Van sending units but I dont know how much modification is necessary. I will bid 25.00 on the rear deck lid .aerodon
21
The Market / Re: 3.4 engine
« on: August 21, 2014, 08:07:02 pm »
High my name is aerodon on the net , I installed that engine way back when and it was a very low milage engine from a stolen & recovered Camaro. 80,000 sounds about right for milage. The car had set for apx. 5yrs. when Joe bought it. IT is good to see it going back into service, the 3600 is a very good swap good luck on your project.
22
General Discussion / Re: Need your prayers for Mrs. FieroFool (Mel)
« on: August 19, 2014, 10:30:15 pm »
I havent called recently as i know you are busy attending to Mel. I will call tomorrow for an update . HOPE SHE IS ON THE ROAD TO RECOVERY.She is in Pats 7my prayers. aerodon.
23
Tech Tips, Tech Questions / Door Hinge Tool
« on: July 28, 2014, 09:41:17 am »
If you have replaced a lower door hinge spring you will need this tool. It is available at NAPA @22.50$ I also found that it will work on the spring on the rear brake cam. This is the spring on 84-87 calipers. I have not tried it on an 88. I also found the tool at Harbor Freight for apx. 9.00$.
.jpg)
24
General Fiero Discussion / Re: *&^^*%RR%^^R% car
« on: July 20, 2014, 06:21:58 pm »
Just think if it was not for global warming you wouldnt need A/C at all. At least thats what the GOV. says. Good luck on the repair.aerodon.
25
Tech Tips, Tech Questions / Front Battery Swap
« on: July 18, 2014, 04:44:33 am »
I have done this swap and it is ok with the 7/8 inch. sway bar, but you will find it is a tight fit if you change to a 1inch sway bar. You must mount the box a high as is possible to not hit the bar. You will have to move your brake line down also . This is pertaining to 84-67 cars only, as the 88s have a 1.8 inch bar up front and I have not tried this swap on an 88. If you have relocated an 88 please put some info on here. aerodon.
26
Club News / B. Scout Car Show
« on: July 12, 2014, 05:30:33 pm »
We had quite an enjoyable day, and appreciate the help & concern for my father's well being & dead car battery. The car made it home with no further problems 
May God bless our club & it's fine members! Thanks a ton, ya'll.
May God bless our club & it's fine members! Thanks a ton, ya'll.
27
Tech Tips, Tech Questions / Re: oil?
« on: July 02, 2014, 11:18:42 pm »
Ihave been using Castrol 15-40 for 20yrs in every Fiero Ihave owned the only exception was my first Fiero as it had the 4cyl. engine with a roller camshaft stock. Crane and Melling cams require this oil to recieve warrenty on new cams. Also Dello 400, and Rotella -T are suggested but the zink content is highest in Castrol. ! currenty have over 100.ooo miles on my 3.4 and Darrell har a little over 31.000 on a 3.4 oil pressure just checked last on both cars before changing the oil sending units. aok . hope this helps you with the use of what oil is best. aerodon!!!
28
Tech Tips, Tech Questions / Exhaust Crossover Bolts
« on: June 28, 2014, 08:20:37 am »
I have discovered that the best bolt to use is the upper plenum bolts , they are chrome plated and will not rust in place, they are the correct length thread and look good on the engine. Just make sure you have a good 10mm 12point socket to install them. Also use high temp never-sieze on the threads. Also they are case hardened and very hard to break. I have them on the last three 3.4 engines and have had no problem with them. Had to remove a set after a year,came right out. They are easy to get, from any V-6 Fiero . There are 10 on every plenum and you only need four. aerodon!!
29
Tech Tips, Tech Questions / Guage Sending Unit
« on: June 24, 2014, 07:15:29 am »
A note to let you know that this particuler sending unit is not called a temp. sensor. At Auto Zone it is listed as a Switch I went to pick one up for the 88 we are working on, could not find it, until a senior employee typed in switch wala there it was, you might run into this problem at Advance but I have not checked into that as yet!! aerodon.
30
Tech Tips, Tech Questions / Re: Fuel Injectors for 3.4 Camaro/Firebird Swap
« on: June 22, 2014, 08:08:15 am »
I am also running the Bosche injecters, the have performed quite well. You can run them as Charley said at stock fuel pressure,there is no need for an adjustable fuel pressure regulator, witch can cost 118.95 from the Fiero Store. You can put that towards the cost of the injecters witch ran 160.00$ when I got mine apx.2 yrs. ago.