Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gasmasher

Pages: [1]
1
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 28, 2021, 07:37:37 pm »
This project is claimed and the title has been signed over.

Thanks for coming out and doing all the heavy work Spartanzz. Had a few issues but it is a rolling chassis. I do have an idea to get the stripped shock tower nut removed and reused. I was wrecked and sun burnt today but a litre of pedialyte got me back on my feet.

Looking forward to the 4th weekend if we can get a truck or trailer to load it up. I can use the Forrester to help move the wall of parts if needed.

2
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 22, 2021, 01:53:00 pm »
Spartanzz,
I am available pretty much any weekend so if a couple of others agree on a date that will be good. I have July 5th off for a long weekend.

I just spoke with the Marshall and he was coming back soon. I told him we have a place for it but it would be early July. He is going to give until July 6th but will have to cite me then if it is still here. The fine is very manageable (<$200) and the court date would be 30 days out from that.

Sorry for not responding earlier.

3
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 16, 2021, 10:28:16 pm »
snip
Also, i think my wife is already regretting saying yes this me starting this project  ;D ;D ;D
So fitting for this project ;) Can't wait for you to show it off.

4
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 16, 2021, 10:21:16 pm »
I go to the office in ATL on Tuesdays and Thursdays but am available all other days. Let me know when things are happening and I'll be happy to provide food and drink (bbq, pizza, beer, soda, water, sport drink, whatever; let me know and I'll get it, grill it or smoke it, maybe all three).

My wife and I are fully vaccinated and the kids have one dose. We all still wear a mask when requested. Y'all can figure that out for yourself since we don't care what you do outside.

5
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 15, 2021, 11:06:43 pm »
gasmaster

I had a laugh but you're not wrong.

Don’t be stealing my nickname. 😂 ⛽️ 💨

Not stolen, gifted ;)

This has been a great couple of weeks. I found Fiero friends to pickup and work on my project. My friendly neighbor wanted a playset and my kids outgrew ours at least 5 years ago. I offered it for free if he did the labor and he moved the entire structure to his backyard today and gave me $100.

Everything is coming up Gasmaster!

I know we need some time to get the plan together. I may forget to check the forum regularly but a few of you have my cell. Feel free to share between you as needed. Please anyone new send a text or PM here or my call screening software may block your number.

Edit: Spartan and Wreck are already saved in my phone

6
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 13, 2021, 02:18:42 am »
gasmaster

I had a laugh but you're not wrong.

7
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 12, 2021, 08:55:05 pm »
Thanks everyone. I'm really glad this is coming together.

8
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 11, 2021, 09:58:18 pm »
That sounds great NoMad. Wreck has first dibs but you are definitely on the list.

Paulding CTY Marshal J came out for a follow up yesterday and was happy to hear there was some interest. He was a member here many years ago and a lot of you helped him move all of his '88 parts when he couldn't climb into it anymore.

He gave me two weeks but I am 80% sure I can hold out until at least July 10th if needed. I'm willing to pay a bit of fines to reach that date if we can get it saved.

9
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 10, 2021, 12:27:17 am »
I can take video calls and have you walk me around instead of driving. No zoom; VNC, Teams or Webex are fine.

I'm going to get the hoist from down the hill tomorrow (my hoist and hill). The cradle/subframe is fine and can be installed with 4 bolts. I'm just medically incapable of moving the subframe.

edit: I meant no to zoom. VNC, Teams and Webex are OK.

10
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 09, 2021, 11:21:57 pm »
I'm digging the cradle/transaxle and the engine mount out of my Empire of Dirt this evening and tomorrow. The (harbor frightening) engine stand is included with the car (no money).

I'll have some pictures of the cradle and motor tomorrow. Sorry this is coming in drips. I am torn between getting this taken care, the storms, and my work schedule.

11
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 09, 2021, 05:31:27 pm »
I attached a single side shot. Additional pictures are shared on Google photos.

https://photos.app.goo.gl/jaZdkjN533eY1smw6

12
The Market / Re: 87 GT (not running or drivable) project has to go
« on: June 09, 2021, 05:22:19 pm »
I think it might be a pretty complicated project for a HS due to how dismantled it is.

13
The Market / 87 GT (not running or drivable) project has to go
« on: June 08, 2021, 10:00:12 pm »
Hi folks,
I am in the Dallas/Hiram area and have an 87 GT project car that needs to go. I was in the process of upgrading to the Camaro motor when medical issues prevented me from working on it. It is possible to be made into a working car, just not by me.

The cradle has been removed and is sitting in my garage on a cheap dolly with the transaxle and shock towers still attached. The block is on an engine stand and has been machined for a rebuild. The original flexplate has also been matched to the crank. The rear of the car is on jack stands. Front wheels are in place. I did not order the motor rebuild kit after machining so the journals will need to be measured for bearing size. I may have the machining spec sheet from Goza Machine in Alatoona.

It is dark so I can't get any decent pictures right now. I will post some tomorrow.

I'm not sure how to move it without damage but it is up for grabs. I do not want money. I just need it gone quickly. I am even fine with someone taking it to part it out.

Pages: [1]