Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Author Topic: Strange power windows  (Read 14698 times)

0 Members and 1 Guest are viewing this topic.

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,984
    • View Profile
Strange power windows
« on: August 09, 2015, 04:36:45 pm »
The silver Formula I bought recently was converted to power windows. I could also tell from the feel of the lock mechanisms that it had aftermarket power lock actuators added, although they currently don't do anything.
The inner door skins have a plug where the window crank used to be. (I need to get some door pockets.)

I was curious, so I took off one of the inner door skins, and found a strange sight...

The windows are operated by a gizmo that actually turns the manual crank shaft.
Below is how the lock actuators are mounted. I personally wouldn't have done it that way, but perhaps they will work OK when I wire them up.

 
« Last Edit: August 11, 2015, 10:24:55 am by TopNotch »
The more complex the mind, the greater the need for the simplicity of play.

Raydar

  • Paid Members
  • *****
  • Posts: 3,016
    • View Profile
Re: Strange power windows
« Reply #1 on: August 09, 2015, 08:16:00 pm »
Interesting.
I had a Chevy Monza, once, that had been converted to "power windows" in a similar manner. They didn't work terribly well, however. Instead of being "remoted", the drive splines were mounted right on top of the shafts. Made for a very "thick" installation. (Bulged the door panels out, about 1/2 - 3/4".)
...

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,984
    • View Profile
Re: Strange power windows
« Reply #2 on: August 09, 2015, 08:31:26 pm »
Interesting.
I had a Chevy Monza, once, that had been converted to "power windows" in a similar manner. They didn't work terribly well, however. Instead of being "remoted", the drive splines were mounted right on top of the shafts. Made for a very "thick" installation. (Bulged the door panels out, about 1/2 - 3/4".)

This setup works as well as a good working stock setup. I would have never known if I didn't take the skin off.
The more complex the mind, the greater the need for the simplicity of play.