Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Author Topic: Hard Starting  (Read 13986 times)

0 Members and 1 Guest are viewing this topic.

pgackerman

  • Paid Members
  • *****
  • Posts: 1,579
    • View Profile
Hard Starting
« on: July 26, 2019, 03:20:05 pm »

My '88 GT is having a bit of trouble starting.  Until recently, it would start without depressing the gas first.  Then I occasionally needed to depress the gas when starting.  Now, I almost always need to depress the gas pedal.

What's the most likely culprit?  Fuel pump (dang, I just filled up)? Starter? Or something else?
Red '88 GT 5-Speed, 7730ECM, 1.6 Rockers, and KEYLESS Entry! 
Now with a trailer hitch for my bike rack.
Southland Jubilee 2019 Best in Class

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,708
    • View Profile
    • Georgia Fiero Club
Re: Hard Starting
« Reply #1 on: July 26, 2019, 03:27:28 pm »
One should never depress the gas pedal to start a fuel injected car.  Try priming the injectors a couple of times by turning the ignition on and off. 
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,984
    • View Profile
Re: Hard Starting
« Reply #2 on: July 26, 2019, 03:31:52 pm »
Sounds like you may  possibly have a leaking cold start injector. The mixture is too rich to start, but depressing the gas pedal lets in more air and dilutes the rich mixture.
The more complex the mind, the greater the need for the simplicity of play.

MikeMac

  • Newbie
  • *
  • Posts: 35
    • View Profile
Re: Hard Starting
« Reply #3 on: July 26, 2019, 05:03:50 pm »
I was having a similar issue on my car and it turned out to be a bad temperature sensor. It wasn't adding enough fuel on startup. It's the sensor on the pulley end of the engine and if I remember correctly it threads in the intake horizontally.

MikeMac

  • Newbie
  • *
  • Posts: 35
    • View Profile
Re: Hard Starting
« Reply #4 on: July 26, 2019, 05:07:52 pm »
Sounds like you may  possibly have a leaking cold start injector. The mixture is too rich to start, but depressing the gas pedal lets in more air and dilutes the rich mixture.

What is the procedure for checking the cold start injector. I think Don removed the one on may car.

GTRS Fiero

  • Hero Member
  • *****
  • Posts: 12,510
  • It is what it is.
    • View Profile
Re: Hard Starting
« Reply #5 on: July 26, 2019, 09:43:24 pm »
Plug the cold start port on the fuel rail.  See if anything changes.

The symptoms you describe are classic cold start injector.