LED taillight bulbs

[Tha Driver]

So... the Mera taillights tend to melt with the stock bulbs. What's it take to convert to LEDs - anyone have a source for quality ones & the electronic flashers?
Thanks,
~ Paul
aka "Tha Driver"

Custom Fiberglass Parts

[GTRS Fiero]

Other than BTR, or are the Mera bulbs different from other Fieros?

[GTRS Fiero]

See here.

A word of caution: these bulbs are longer than stock.

[GTRS Fiero]

Just to be clear.  You have an Indy, AND a Mera?

[Tha Driver]

See here.

A word of caution: these bulbs are longer than stock.

Link is screwed in my browser - page is covered with a grey "popup", & the X to close it doesn't work. Wish webmasters would code better...
And no, I don't own a Mera just working on it for a friend. 
It takes standard 1157 & 1156 bulbs.
~ Paul
aka "Tha Driver"

Custom Fiberglass Parts

[TopNotch]

I have LEDs for all external lights on both my Fieros. Some are from Ebay, and some from a Chinese company called tomtop.com. Try to find ones where the seller states the lumens of the bulbs.
The particular ones I used for tail lights are from this seller on Ebay, and are currently out of stock (all socket 1157 bulbs are listed as out of stock). If they are ever in stock again, they're good bulbs.

[GTRS Fiero]

This company is local to me.  I've never tried these bulbs.

https://www.superbrightleds.com/moreinfo/led-vehicle-replacement-bulbs/1157-led-bulb-w-stock-cover-dual-function-36-smd-led-tower-bay15d-retrofit-car/1689/3950/?utm_source=googlebase&utm_medium=base&utm_content=1157-x3W-G-CAR&utm_campaign=GoogleBaseChild&gclid=Cj0KCQjwg7HPBRDUARIsAMeR_0jdOkPustsSyHbelcQlKHO_FOisNxDcNrYK9snRNLIC_O0aAHCWkdoaAgFKEALw_wcB

[TopNotch]

The signal flasher I use with LED bulbs is a Novita EP34. You can get these at Auto Zone where the electronic parts peg boards are. It's a 3- pin device, so you plug it into the Fiero 2-pin connector and ground the third pin. There's a diagram on the back of the card it comes on showing the pins. Ground the one labeled "negative".

[Tha Driver]

Thanks Pat. Good to know what works - to bad they're out of stock on the 1157s.
~ Paul
aka "Tha Driver"

Custom Fiberglass Parts

[Tha Driver]

Just to be clear.  You have an Indy, AND a Mera?

BTW, While I don't have a Mera, In addition to the Indy I have an '88 custom project, an '88 lightweight solo project, the VW Cabrio with Fiero drivetrain & SBC (project), an '88 that someone needs to build, an '86 parts car (no engine, trans, or interior), a wrecked '88 parts car, & a little left of an '84 parts car.
I also have two project bugs, the project Z car ('77), the project Dodge pickup, & the mini car.
And my "daily" driver '82 BMW 320i.
Lots of projects - no money. 
~ Paul
aka "Tha Driver"

Custom Fiberglass Parts

[GTRS Fiero]

For some reason, I thought you sold the pickup.