3.4 swap runs but sputters smooths out then dies smells very rich

[Sandman87]

You know I woke up in the middle night and was thinking that popping noise it makes reminds me of when I had those Camaro injectors in there. I drove around quite a bit yesterday I'm wondering if one of those Bosch fuel injectors I got is faulty? I'm going to put a screwdriver on the top of those today and let it run just make sure that those are all pulsing.

[GTRS Fiero]

Um, how does this screwdriver thing work?

[Sandman87]

I just put it up against the back of the injector and put it up against my ear and just hear if I can hear it pulsing doesn't necessarily mean it's working right but at least I know I have power.also as of this morning I can disconnect the map sensor and it will stay running

[Sandman87]

here is the link to the video I shot yesterday

https://youtu.be/Y_AEpA3IcXk

[GTRS Fiero]

Ah.

For the MAP sensor, you unplugged it prior to starting the engine, right?  Any change in how the engine runs?

[Sandman87]

I still think I hear a vacuum leak but I can't pinpoint it or get it to surge using propane maybe I'm just hearing intake noise I can't be sure

[Sandman87]

I will unplug it now and start it give me a second

[Sandman87]

Nope it runs the same triggers a check engine light obviously but runs the exact same when I unplug it and then start it

[Sandman87]

I am uploading another video to YouTube of the engine bay area it'll be uploaded in about 5 to 10 minutes I'll drop a link

[GTRS Fiero]

here is the link to the video I shot yesterday

https://youtu.be/Y_AEpA3IcXk

Would you post a video of the engine running, from the engine bay, with the car parked?  You can blip the throttle by hand.

Your uniquely-shaped ignition key looks gold.

I saw that the brake light was on.  Is the e-brake released?

It seems down on power, or the speedo is off.  If I get on mine like that, it will be up to 60MPH.

[Sandman87]

yeah it is definitely down on power for sure the E brake light is on because the e-brake is disconnected and there's something funky going on with the little sensor by the handle

[Sandman87]

https://youtu.be/NXRQOYJ8WfQ

[Sandman87]

Vacuum at idle

[Sandman87]

Idle is 1150 rpm

[GTRS Fiero]

That sensor sometimes requires a bit of adjustment.